Janome Overlocker Cording Foot Type B
Out of stock
or 4 payments of $9.75 with Wizit learn more
Create a full looking edge on your overlocker with the Janome Cording Foot (B). Capable of working with thicker cords and piping, this foot uses its guide to perfectly deliver the cord so that it can be overlocked over with a rolled hem.Â
$39.00 $50.00
Out of stock
Janome Cording Foot (B)
Overlocker Foot
Part Number: 200 208 109
Create a full looking edge on your overlocker with the Janome Cording Foot (B). Capable of working with thicker cords and piping, this foot uses its guide to perfectly deliver the cord so that it can be overlocked over with a rolled hem.Â
This Janome Cording Foot B fits the following overlockers:
Janome: 1110DX, 204D, 434DR, 544D, 634D, 644D, 7034D, 734D, 744D, 9002D, 9102D, HF3434D, HF504D, HF9102D, HF7933, 8002D, 8002DX, 8004D, AT2000D (Air Threader)
Elna:Â 792D, 664, 664Pro, Elina Pro
Weight | 0.027 kg |
---|
Related products
-
For 5mm Machines, For 7mm Machines, Presser Feet
Janome Concealed Zipper Foot
0 out of 5(0)Good quality ready to wear garments will often have an invisible zip fitted. These zippers are often neglected by the home dressmaker, which is a pity because with the Concealed Zipper Foot, they can ensure success every time. Invisible zips are suitable for all fabrics from fine silk jersey through to suit weight wools and tweeds. The key is to get the needle as close to the fastener as possible, which this foot accomplishes by slightly unrolling the zipper just before the needle. Once fitted, a well sewn invisible zipper will merely look like part of the seam.
SKU: 200 333 001 -
For 5mm Machines, For 7mm Machines, Presser Feet
Janome Adjustable Zipper Foot
0 out of 5(0)Perfect for Zippers and Cording, the Janome Adjustable Zipper Foot (occasionally referred to as the “AZ” foot) is a must-have tool in the sewing toolbox. With the ability to move the foot closer so that you can meet the edge of the zipper, or away for a seam allowance, the Janome Adjustable Zipper Foot offers you the flexibility that you need.
This foot fits all 5mm and 7mm low shank machines.
SKU: 200 342 003 -
For 7mm Machines, Presser Feet
Janome 7mm Piping Foot
0 out of 5(0)Whether you are using pre-made cording (or piping) or you are wanting to create your own, the Janome Piping Foot is ideal for the job. Featuring two grooves on the underside, the Piping Foot holds your cord in place enabling you to easily create your own piping tape. With a maximum cord width of 5mm, there is nothing stopping you for creating a unique touch to your next project.
SKU: 200 314 006